How To Reshaft A Golf Club Driver
To remove a graphite shaft place the shaft in a graphite shaft extractor following the instructions that came with the tool.
How to reshaft a golf club driver. Heat the hosel with a heat gun while wearing leather gloves. You will find a link to each tool used. The newer shaft will be cut to size and applied to the golf club using an epoxy. Slowly turn the extractors threaded bolt with a box wrench.
If the head does not loosen reapply heat to the hosel. Learn how to re shaft your very own golf club. Reshafting is an inexpensive way to try out many of the latest shaft advancements and learn which shafts fit you best. Use a heat gun instead of a blow torch with graphite shafts.
Place the ferrule onto the shaft. We need more of these. To do this place a small amount of epoxy on the inside of the ferrule and slide the ferrule onto the shaft narrow end first. Dip the tip of your shaft into the epoxy making sure.
Instructions place the shaft in a vise and tighten it if your shaft is made of steel. During the procedure the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. How to reshaft a golf driver.
Reshafting golf clubs overview. Thp tv went right to the experts at ust mamiya to have them show a step by step guide to reshafting a driver and these instructions can be used to reshaft any golf club. How to reshaft golf clubs one of the most asked questions about golf club work is how difficult is it to reshaft golf clubs specifically a driver with an adapter. Begin with your driver.
If your new shafts are made of steel rough up the tips with a file. Simply follow these instructions to get your golf club re shafted. I dont have a problem with installing a new shaft. Place your clubhead on top of the ferrule and place the grip end of the club on the floor.